小米5x安装postmarketOS

# 有代理可以先配置代理服务加速拉取
# export http_proxy="http://10.0.0.102:10808"
# export http_proxys="http://10.0.0.102:10808"
git clone https://gitlab.postmarketos.org/postmarketOS/pmbootstrap.git

# 可能会缺少一些依赖，按照提示安装即可
# adb, fastboot, git, python3, kpartx，...
cd pmbootstrap
./pmbootstrap.py init
 
#'work' path: 默认或者自定义路径
#Channel [edge]: edge 
#Vendor [qemu]: qcom
#Device codename: msm8953
#Username [user]: #自定义你的ssh用户名或者默认user
#User interface [console]: #选择桌面环境，不需要图形界面就选console或shelli,none,等
#其它选项默认即可

./pmbootstrap.py config mirrors.alpine https://mirrors.tuna.tsinghua.edu.cn/alpine/
./pmbootstrap.py config mirrors.pmaports https://mirrors.tuna.tsinghua.edu.cn/postmarketOS/

./pmbootstrap.py install
#过程中会让你设置ssh密码

#刷前可能需要擦除一下分区 
#fastboot erase userdata 
./pmbootstrap.py flasher flash_lk2nd
./pmbootstrap.py flasher flash_rootfs

./pmbootstrap.py export #导出创建的系统镜像
#然后用fastboot命令手动刷入
#检查是否有这个两个文件
#'/tmp/postmarketOS-export/lk2nd.img'
#'/tmp/postmarketOS-export/qcom-msm8953.img'
 
fastboot flash boot /tmp/postmarketOS-export/lk2nd.img
fastboot flash userdata /tmp/postmarketOS-export/qcom-msm8953.img

sudo nmcli device wifi list ifname wlan0
sudo nmcli device wifi connect "$SSID" password "$PASSWORD" ifname "wlan0"